Metalized FILMS

Type	Description	Standard Thickness* (μ)	USP	Application
J200M0	Normal density metallization on plain side and other side plain	8,9,10,12,23 μ	Standard Density Standard Metal Bond Strength Standard Water Vapour and Gas Barrier properties Good Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application, especially for higher gloss and barrier properties.
J200M4	High density metallization on plain surface with plasma treatment and other side plain.	12 μ	High Density Standard Metal Bond Strength High Water Vapour and Gas Barrier properties Good Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application, especially for high barrier properties.
J201M0	Normal density metallization on Corona side and other side plain	7,8,9,10,12,15,19,23,36,50 μ	Standard Density Improved Metal Bond Strength Standard Water Vapor and Gas Barrier properties Good Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application, especially for higher gloss and barrier properties.
J201M1	Normal density Metallized on plain surface and other side corona treated	8,9,10,12,15,23,36 μ	Standard Density Standard Metal Bond Strength Standard Water Vapor and Gas Barrier properties Good for Printing and Lamination Excellent Machinability	Suitable for flexible packaging application, especially for higher gloss and barrier properties.
J202M0	High density Metallization on corona surface and other side plain	8,10,12 μ	Average Density Standard Metal Bond Strength Moderate Water Vapour and Gas Barrier properties Standard Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application, especially for higher gloss and barrier properties.
J202M1	High density Metallised on plain surface with plasma and other side corona treated.	10,12,36 μ	Average Density Standard Metal Bond Strength Moderate Water Vapour and Gas Barrier properties Standard Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application where high barrier is required
J202M4	High density Metallization on corona surface and other side plain	8,10,12 μ	High Density Standard Metal Bond Strength Good Water Vapour and Gas Barrier properties Good Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application, especially for high barrier properties requirement
J221M0	Normal density metallization on pre-coated co polyester side and other side plain	8,10,12,23 μ	Standard Density Good Metal Bond Strength Standard Water Vapour and Gas Barrier properties Standard Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application where good barrier and high metal bond is required, film is not recommended for liquid / sterilization application
J221M4	High density metallization on pre-coated co polyester side and other side plain	8,10,12 μ	High Density Good Metal Bond Strength Good Water Vapour and Gas Barrier properties Standard Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application where high barrier and high metal bond is required
J222M1	Normal density Metallised on pre-coated co polyester surface and other side corona treated.	10,12,15 μ	Standard Density Good Metal Bond Strength Standard Water Vapour and Gas Barrier properties Corona side good for Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application where high barrier and high metal bond is required
J222M4	High density Metallized on pre-coated co polyester surface and other side corona treated	10,12 μ	High Density Good Metal Bond Strength Good Water Vapour and Gas Barrier properties Corona side Good for Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application where high barrier and high metal bond is required
J222M5	Ultra high density metallization on pre-coated co polyester side and other side corona	12 μ	High Density Good Metal Bond Strength Excellent Water Vapour and Gas Barrier properties Good Lamination Bond Strength Excellent Machinability	Suitable for flexible packaging application where high barrier and high metal bond is required

Type	Description	Standard Thickness* (μ)	USP	Application
H1-MD	One Side Metallised, Other Side Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure. The film exhibits excellent water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated heatsealable side exhibits excellent hot-tack and seal strength	15,18,20,25,30,35,40 μ	Excellent Surface Gloss on Metallised Side Very Good Water Vapour and Gas Barrier Properties Excellent Adhesion of Aluminium Very Good Anchorage of Lamination Adhesive on Metallised Side Very Good Metal Bond Strength Very Good Lamination Bond Strength Excellent Machinability Very Good Hot-Tack and Seal Strength	Heat Sealable Metallised Film for Single / Two Ply Packaging Structure
H1-LMD	One Side Metallised, Other Side Low SIT Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure for High Speed Packaging Machines. The film exhibits excellent water vapour and gas barrier properties. During metal isation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives.The untreated low SIT heat sealable side exhibits excellent hot-tack and seal strength.	15,18,20,25,30,35,40 μ	Low SIT Heat Sealable Skin with Excellent Hot-tack and Seal Strength Excellent Surface Gloss on Metallised Side Very Good Water Vapour and Gas Barrier Properties Excellent Adhesion of Aluminium Very Good Anchorage of Lamination Adhesive on Metallised Side Very Good Metal Bond Strength Very Good Lamination Bond Strength Excellent Machinability Very Good Hot-Tack and Seal Strength	Low SIT Heat Sealable Metallised Film for Single / Two Ply Packaging Structure for High Speed Packaging Application.
H1-UMD	One Side Metallised, Other Side Ultra Low SIT Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure for High Speed Packaging Machines. The film exhibits excellent water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated ultra low SIT heat sealable side exhibits excel ent hot-tack and seal strength.	15,18,20,25,30,35,40 μ	Ultra Low SIT Heat Sealable Skin with Excellent Hot-tack and Seal Strength Excellent Surface Gloss on Metallised Side Very Good Water Vapour and Gas Barrier Properties Excellent Adhesion of Aluminium Very Good Anchorage of Lamination Adhesive on Metallised Side Very Good Metal Bond Strength Very Good Lamination Bond Strength Excellent Machinability Very Good Hot-Tack and Seal Strength	Ultra Low SIT Heat Sealable Metallised Film for Single / Two Ply Packaging Structure for Very High Speed Packaging Applications
N1-MD	One Side Metallised, Other Side Non Heat Sealable OPP Film for use in Lamination with Paper / Paper Board, Gift Wrapping and Decorative Application. The film exhibits excellent water vapour and gas barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with Inks during printing.	8,10,15,17,18,20,25 μ	Excellent Surface Gloss on Metallised Side Very Good Water Vapour and Gas Barrier Properties Excellent Adhesion of Aluminium Very Good Anchorage of Inks on Metallised Side Very Good Metal Bond Strength Excellent Machinability	Lamination with Paper / Paper Board for Various Applications like Disposable Paper Plates, File Covers, Leaflats Etc. • Gift Wrapping Applications • Other Decorative Applications
N2-MD	One Side Metallised, Other Side Corona Treated Non Heat Sealable OPP Film for use as Sandwich Layer in Three Ply Laminate Packaging Structure. The film exhibits excel ent water vapour and gas barrier properties. During metal isation process film is treated with plasma for enhancing metal adhesion and barrier properties. Metal ised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The corona treated non heat sealable side is also designed for excellent anchoring to lamination adhesive.	15,18,20,25,30,35,40,49 μ	Excellent Surface Gloss on Metallised Side Excellent Water Vapour and Gas Barrier Properties Excellent Adhesion of Aluminium Very Good Anchorage of Lamination Adhesive on Metallised Side as wel as Corona Treated Side Very Good Metal Bond Strength Very Good Lamination Bond Strength Excellent Machinability	Non Heat Sealable Metallised Film for Sandwich Layer in Three Ply Laminate Packaging Structure.
H1-MTD	One Side Matt Metallised, Other Side Heat Sealable OPP Film is excellent water vapour and gas barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated heat sealable side exhibits excellent hot-tack and seal strength.	18 μ	Designed to give Rich Matt finish appearance after Metallization Excellent Surface Treatment Retention Excellent Adhesion of Aluminium on Treated Side Excellent Machinability Excellent Mechanical Properties Excellent Dimensional Stability Very Good Hot-Tack and Seal Strength	Heat Sealable Matt Metallised Film For High Speed Packaging Application.